QuickLabel Kiaro! - Manual (Page 21)

Quick Start Guide
Kiaro! User Guide 5
3 Unwrap the plastic bag from top to bottom.
4 Holding the handles at the bottom of the printer, lift the printer to take it out from
the package base. Lift from the illustrated points. Do not hold the front side of the
printer.
Note: The printer weighs about 53 pounds (24 kilograms). Two persons are required to lift
the printer. Two persons standing at the front and back of the printer respectively must lift
the printer by holding it with their hands under the bottom handles (two at the front, one
at the left, and one at the right). Attempting to lift the printer in an improper position can
result in the printer falling or injury.
5 Place the printer on a horizontal table. Then remove all pieces of packing tape and
cushioning materials visible on the exterior of the printer.