QuickLabel Kiaro! - Manual (Page 120)

Troubleshooting
104 Kiaro! User Guide
6 Close the upper unit.
Note: When closing the upper unit, take care not to touch the interface at the back with
your finger. Your finger can be caught in the interface, resulting in injury.
7 Reload media.
Printer Not Operating Correctly
Power Off
Check Point Solution
Main power switch is at the off position. Press main power switch to the on posi-
tion.
Printer power cord unplugged. Make sure that the power cord is
plugged in completely.
Power supply not providing power. Connect another device to the power
supply to confirm that the outlet is pro-
viding power. If you cannot restore the
printer to normal operation, contact
QuickLabel Support.