QuickLabel Kiaro! - Manual (Page 47)

Introduction
Kiaro! User Guide 31
Back View
# Part Description
1 Rear Feeder Slot This slot is used to feed fanfold paper.
2 Rating Plate A serial number for identifying the printer is
shown on this plate. The serial number is
required when you ask for repair of the printer or
to register yourself as a user.
3 RS232C Port Reserved.
4 RS232C Port This port is used for the external control interface.
For more information, refer to the Kiaro! Com-
mand Interface Guide.
5 USB Port Connect a USB cable here to connect to the com-
puter.
6 LAN Port Connect a LAN cable here to connect to the com-
puter.
7 Power Socket Connect the power cord here.
[1]
[7]
[3]
[4]
[5]
[6]
[2]