QuickLabel Kiaro! - Manual (Page 50)

Introduction
34 Kiaro! User Guide
Switching the Printer On and Off
Switching the Printer On
Make sure that the power cable is connected properly, and then turn on the printer.
1 Press the power key for at least one second.
Cleaning is performed and the printer becomes ready for printing. When the
printer is in the Online mode, the STATUS LED stays lit.
3 FEED Key Pressing this key in the offline mode feeds media.
4 BACK FEED Key Pressing this key feeds media one page back-
ward. Pressing and holding this key feeds media
backward continuously.
5 Ink Warning LEDs • On - No ink or ink tank missing.
• Blinking - Low ink.
• Off - Sufficient ink.
6 Maintenance Cartridge
Warning LED • On - Full
• Blinking - Nearly full.
• Off - Sufficient room to collect ink.
7 ERROR LED
• On - Operator-call error (can be recovered by
user operation).
• Blinking - Fatal error.
• Off - Normal.
8 STATUS LED • On - Online mode.
• Blinking - Data being received (printing,
cleaning, initializing, shut-down).
• Off - Offline mode (during cleaning, etc.).
# Part Description