Quick start guide, Before installing the printer, Choosing an installation location – QuickLabel Kiaro! User Manual
Page 17: Chapter: 1
Kiaro! User Guide
1
1
Quick Start Guide
Before Installing the Printer
Choosing an Installation Location
The installation environment must be as described in this section.
•
The printer power cord must be able to connect to an outlet (100V - 240V AC
+10%/-15%). This outlet must be easily accessible.
•
Avoid installing the printer near a faucet, water heater, humidifier, or refrigerator.
•
Ensure the environment temperature is within 59 to 86 degrees Fahrenheit (15 to
30 degrees Celsius).
•
Ensure the environment humidity is within 10% to 80% relative humidity.
•
Avoid placing the printer in areas exposed to high temperature and humidity,
extremely low temperature, severe temperature changes, or direct sunlight.
Especially, avoid placing the printer near fire, outdoors, in distribution
warehouses, or in refrigerated areas.
•
Avoid installing the printer in areas subject to dust.
•
The room must be properly ventilated.
•
No printer feet should float. The printer must be held level constantly.
•
When placing the printer on a desk, table, or other similar surface, it must be
sturdy and stable enough to support the weight of the printer.