Slow to print, Print quality is poor, Slow to print print quality is poor – QuickLabel Kiaro! User Manual
Page 124
Troubleshooting
108
Kiaro! User Guide
Slow to Print
Print Quality is Poor
Check Point
Solution
Check whether the number of copies is
specified on the application side.
If the number of copies is specified on
the application side, new print data is
sent each time printing of a copy is com-
pleted, requiring a long time to finish
printing the specified number of copies.
In such a case, specify the number of
copies on the printer driver side.
Print speed is set to a lower speed.
Set the print speed in the Layout tab of
the printer driver or in Custom Quick-
Label Omni. Auto print speed is recom-
mended.
Check Point
Solution
White spots due to missing colors.
Open the Cleaning tab of the Mainte-
nance Utility and perform cleaning.
If the problem persists after performing
cleaning, contact QuickLabel Support.
Printout is faint.
Open the Cleaning tab of the Mainte-
nance Utility and perform cleaning.
If the problem persists after performing
cleaning, contact QuickLabel Support.
Misalignment of colors appears.
Open the Adjustment tab of the printer
and perform registration.
The overall print quality is poor.
Use only QuickLabel Systems media for
the printer. Otherwise, a media jam or
failure may result.