Microcom 814M Programming Manual - Manual (Page 75)

71
FS W n
[Name] Select/cancel quadruple-size mode of Chinese character
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Description] Select/cancel quadruple-size mode of Chinese character .
• When the LSB of n is 0, quadruple-size mode of Chinese character is turned off.
• When the LSB of n is 1, quadruple-size mode of Chinese character is turned on.
[Notes] • Only the LSB of n is effective.
• When quadruple-size mode is turned on, the size of Chinese character is same as when
double-width mode and double-height mode are both turned on.
• When quadruple-size mode is turned off, the characters are printed in normal size.
• All the character are aligned at the baseline.
• FS ! or GS ! also can select or cancel quadruple-size mode of Chinese character, the last
received command is effective.
[Default] n = 0
[Reference] FS !, GS !