Microcom 814M Programming Manual User Manual
Page 73
69
FS 2 c1 c2 d1...dk
[Name]
Defined user-defined Chinese character
[Format]
ASCII
FS
2
c1 c2 d1...dk
Hex
1C
32
c1 c2 d1...dk
Decimal 28
50
c1 c2 d1...dk
[Range]
c1, c2 indicate character code for the defined character
c1 = FEH
A1H ≤ c2 ≤ FEH
0 ≤ d ≤ 255
k = 72
[Description]
Defined user-defined Chinese character specified by c1 and c2.
[Notes]
• c1 ,c2 indicate character code for the defined character,c1 specifies first byte, c2 specifies
the second byte.
• d indicate data.1 indicate to print 1 dot ,0 indicate not print a dot.
[Default]
No user-defined Chinese character.
[Reference] FS C
The relationship of a user-defined Chinese character and the data is described as follow：