Microcom 814M Programming Manual User Manual
Page 64
60
[Description]
[Notes]
[Default]
[Reference]
Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n
Font
0,48
Standard ASCII characters :
203DPI (12 × 24)
300DPI (18 x 34)
1,49
Compressed ASCII characters:
203DPI ( 9 x 17)
300DPI (12 x 24)
HRI indicates Human Readable Interpretation.
HRI characters are printed at the position specified by GS H.
n = 0
GS H, GS k
GS h n
[Name]
[Format]
[Range]
[Description]
[Default]
[Reference]
Select bar code height
ASCII
GS
h
n
Hex
1D
68
n
Decimal 29
104
n
1 ≤ n ≤ 255
n specifies the number of dots in the vertical direction.
n = 162
GS k
GS k m d1...dk NUL GS k m n d1...dn
[Name] Print bar code
[Format]
ASCII
GS
k
m d1...d k NUL
Hex
1D
6B
m
d1...d
k
00
Decimal
29
107
m d1...d k 0
ASCII
GS
k
m n d1... dn
Hex
1D
6B
m
n d1...
dn
Decimal
29
107
m
n d1...
dn
[Range] 0 ≤ m ≤ 6, m = 10, 11, 12 (k and d depends on the bar code system used)
65 ≤ m ≤ 73, m = 75, 76, 77 (k and d depends on the bar code system used)
[Description] Selects a bar code system and prints the bar code.
m selects a bar code system as follows: