Microcom 814M Programming Manual - Manual (Page 26)

22
[Default]
[Reference]
The default tab positions are at intervals of 8 standard ASCII characters (columns 9, 17,
25).
HT
ESC E n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
Turn emphasized mode on/off
ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
0 ≤ n ≤ 255
Turns emphasized mode on or off
♦ When the LSB of n is 0, emphasized mode is turned off.
♦ When the LSB of n is 1, emphasized mode is turned on.
ƒ
Only the least significant bit of n is effective.
ƒ ESC ! turn on and off emphasized mode in the same way, the last received command
is available.
ƒ Printer output is the same in double-strike mode and in emphasized mode.
n = 0
ESC !, ESC G
ESC G n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
Turn on/off double-strike mode
ASCII ESC G n
Hex 1B 47 n
Decimal 27 71 n
0 ≤ n ≤ 255
Turns double-strike mode on or off.
♦ When the LSB of n is 0, double-strike mode is turned off.
♦ When the LSB of n is 1, double-strike mode is turned on.
ƒ
Only the least significant bit of n is enabled.
ƒ Printer output is the same in double-strike mode and in emphasized mode.
ƒ ESC ! can turn emphasized mode on/off, the last received command is effective.
n = 0
ESC E, ESC !