Microcom 814M Programming Manual User Manual
Page 46
42
[Notes]
[Default]
[Reference]
This command is effective for all characters (alphanumeric and Kanji) except for HRI
characters.
If n is outside of the defined range, this command is ignored.
In standard mode, the vertical direction is the paper feed direction, and the horizontal
direction is perpendicular to the paper feed direction. However, when character
orientation changes in 90° clockwise-rotation mode, the relationship between vertical
and horizontal directions is reversed.
In page mode, vertical and horizontal directions are based on the character
orientation.
When characters are enlarged with different sizes on one line, all the characters on the
line are aligned at the baseline.
The ESC ! command can also turn double-width and double-height modes on or off.
However, the setting of the last received command is effective.
n = 0
ESC !
Character Width Selection
Character Height Selection
Hex Decimal
Width
Hex
Decimal
Width
00
0
1 (normal)
00
0
1 (normal)
10 16
2
01 1
2
20 32
3
02 2
3
30 48
4
03 3
4
40 64
5
04 4
5
50 80
6
05 5
6
60 96
6
06 6
6
70 112
6
07 7
6
GS # n
[Name]
[Format]
[Range]
[Description]
[Notes]
Specify a number for the bit-image to be downloaded.
ASCII
GS
# n
Hex
1D
23 n
Decimal 29
35 n
0 ≤ n ≤ 7
Specifies a number for the bit-image to be downloaded. This number is to be used when
downloading and printing this bit-image.
The command is only enabled for bit-images in RAM and the settings are erased
when the printer is turned off.