Microcom 814M Programming Manual User Manual
Page 40
36
Y1 = Y 1l + Y1h×255.
[Notes]
• This command is effective only in page mode.
• This command can only make horizontal line and vertical line, so Y0 must equal to Y1 when X0
is unequal to X1,and X0 must equal to X1 when Y0 is unequal to Y1.
• This command is not effective when the start point and end point exceeds the printing area.
ESC t n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
Select character code table
ASCII
ESC
t
n
Hex
1B
74
n
Decimal 27
116
n
0 ≤ n ≤ 5, 16 ≤ n ≤ 19,
Selects a page n from the character code table.
n
Page
0 PC437
1 Katakana
2 PC850
3 PC860
4 PC863
5 PC865
16 WPC1252
17 PC866
18 PC852
19 PC858
This command is enabled only for 203 DPI printers.
If the character set in printer is Chinese font, this command is not effective.
If printer font is Chinese character font, use ESC M n command to select English font
first, then select page code with this command.
Details see appendix 2 (Character code table)
n = 0