Metric Halo 2882 operating guide - Manual (Page 81)

Mobile I/O User’s Guide
73
There are some advanced settings in the Nuendo Device Setup Dialog that
you need to select for proper operation. You can access these settings by
clicking the “Expert…” button. The VST Engine Expert Settings Dialog will
appear:
You should make sure that the Lower Latency and Compatibility Mode
checkboxes are enabled – if they are not enabled, you will encounter prob-
lems. The other elements of the expert options are not critical, but you may
want to use the settings we show here as they have been tested extensively
with Mobile I/O.
The Device Setup Dialog also provides access to Mobile I/O’s external clock
sources from the “Clock Source” popup menu. This menu contains the same
options that appear in the MIO Console clock source popup menu.
Nuendo’s VST Inputs window provides access to the controls to name the
ASIO input channels. It also allows you to enable input channels. The port
names that appear on the left hand side of the window are the physical input
ports reported to Nuendo from the driver. The names on the right side of the
window are user configurable. The “On” buttons down the middle of the
window control which channel pairs have been enabled in the driver. You
need to enable these to assign input strips to the hardware channels, but
Figure 54: Nuendo VST Expert Options
Figure 55: Nuendo Clock Source Popup