Metric Halo 2882 operating guide - Manual (Page 18)

Mobile I/O User’s Guide
10
Mobile I/O Rear Panel
The Mobile I/O rear panel features:
• 4 channels balanced XLR inputs. Each input has:
• 24-bit 96kHz A/D converters (110dB SNR)
• remote controllable pre-amps with 40 dB of gain
• remote switchable input impedance characteristics
• remote switchable 20dB pad
• remote switchable 48v Phantom power, with 10mA current limit
• 4 channels balanced TRS inputs. Each input has:
• 24-bit 96kHz A/D converters (110dB SNR)
• remote controllable pre-amps with 40 dB of gain
• remote switchable input impedance characteristics
• remote switchable 20dB pad
• remote switchable 48v Phantom power, with 10mA current limit
• 8 channels balanced TRS outputs. Each output has:
• 24-bit 96kHz D/A converters (120dB SNR)
• remote controllable output gain (from -12dBV up)
• 8 channels of ADAT® lightpipe input (with SMUX support)
• 8 channels of ADAT® lightpipe output (with SMUX support)
• Wordclock input/output on BNC connectors
• 256x Wordclock input/output on BNC connectors
• Stereo S/PDIF input/output on RCA connectors
• Stereo AES/EBU input/output on XLR connectors
• 2 IEEE 1394 (FireWire) ports (400 Mbs)
• 1 2.1mm DC power jack (9v - 30v, center positive, 15 Watts)
Figure 8: Mobile I/O Rear Panel