Metric Halo 2882 operating guide - Manual (Page 58)

Mobile I/O User’s Guide
50
The channel identification controls identify which channel you are adjusting:
• The MIO Box popup menu allows you to select which Mobile I/O you
want to configure if more than one Mobile I/O is present on the bus.
• The Channel Type popup menu lets you switch between input channels
and mix busses.
• The HW Channel popup menu identifies which hardware channel you
are adjusting.
• The < button associated with the MIO Box and HW Channel popup
menus steps to the previous item in the associated list.
• The > button associated with the MIO Box and HW Channel popup
menus steps to the next item in the associated list.
M ATRIX P ARAMETER P OPUP
The entire state of the Matrix can be saved to and recalled from the Console
Parameter Library System. The basic functions of the Parameter Popup con-
trol are documented in the next section (see “Parameter Popup Controls” on
page 50). Since you are very like to have a number of tracking and mixing
configurations you use over and over again, the Parameter Popup for the
Matrix is a real timesaver. This control appears in the top left corner of the
pane, above the Parameter Popup control for the Patchbay router. Each time
you create a configuration that you are likely to use again, save it in the
Parameter Library for instant recall when you need it next.
P ARAMETER P OPUP C ONTROLS
The Parameter Popup control is MIO Console’s unified mechanism for han-
dling presets for the various sections of the Mobile I/O. Each element of the
console that supports the Parameter Library mechanism has a parameter
popup control associated with it. These elements currently include:
• Input Channels
• Output Channels
• Mixers
• Output Patchbay
• Matrix