Popup commands, Figure 39, Mobile i/o user’s guide – Metric Halo 2882 operating guide User Manual
Page 59

Mobile I/O User’s Guide
51
Each instance of the Parameter Popup control provides the same commands
and options for every section of the console.
P
OPUP
C
OMMANDS
The parameter popup provides a hierarchical, categorized library of configu-
ration presets for the associated section of the console. The menu is divided
into three portions. The first portion consists of all of the items above the
“Factory Default” item. The second portion is the “Factory Default” item and
the third portion is the hierarchical items below the “Factory Default” item
(see Figure 39 on page 51).
The commands in the first portion of the menu allow you to save and man-
age the presets in the library. All of the presets are shared between like ele-
ments in the console. The preset commands are:
• Save Parameters
use this command to save the current state of the associated con-
sole settings to the currently selected preset (will appear as “Save
Parameters As…” if there is no currently selected preset)
• Save Parameters As…
use this command to name and select a category to save the current
state of the associated console settings as a preset into the library
• Rename Current Parameters…
use this command to rename the currently selected preset
Figure 39: Parameter Popup Menu