Metric Halo 2882 operating guide - Manual (Page 71)

Mobile I/O User’s Guide
63
Now in the Output Patchbay we’ll assign Monitor L and Monitor R to Analog
1 and Analog 2. This creates the routing for our Big Monitors. We’ll also
make sure to assign an output pair that we know won’t ever have signal on it
to Analog 3 and Analog 4. We’ll use Daw 17 and Daw 18.
We want to make sure that Analog 3 and Analog 4 won’t ever have signal in
this setup because the Small Monitors are connected to Analog 3 and Ana-
log 4 and we don’t want to have random channels playing through the Small
monitors while we are listening to the Big Monitors.
Next we’ll save this routing using the Patchbay parameters popup menu. But
first we’ll create a new category by choosing Create new category... from
the Patchbay Parameters popup.
A dialog will appear:
We’ll name the category “Monitors” and click OK.
Figure 48: Setting the Monitor path
Figure 49: Naming a category