Metric Halo 2882 operating guide - Manual (Page 68)

Mobile I/O User’s Guide
60
The Effects Send mix should feed the AES outputs so we’ll set the Digital sec-
tion of the Output Patchbay to take its input from Effects Send L/R.
The routing is now set. We can save the setup for the next tracking session
using the Matrix Parameters and Patchbay Parameters popup menus (see
“Parameter Popup Controls” on page 50 for details).
Now we’ll switch to the Mixer View.
Notice the Mix Tabs on the left are now labeled Headphone L/R and Effect
send L/R. Also notice the fader marked Daw 1/2 on the right. We’ll use this
fader to control the playback level of the ASIO tracks we want to overdub
against.
If you have signals running to Mobile I/O you should see activity on both the
input meters and the mixer meters.
Figure 45: Headphone Mixer