What you need to use it, Mobile i/o user’s guide – Metric Halo 2882 operating guide User Manual
Page 10

Mobile I/O User’s Guide
2
• 8 ADAT® Optical Inputs and Outputs
• Sample Rate Conversion (SRC) on Digital I/O
• Built-in 80-bit, fully interpolated, multi-bus mixer for near-zero
latency foldback of all input channels and all DAW busses simulta-
neously
• Full cross point router for I/O management
• Word Clock 1x, 256x
• Front Panel Metering for Analog Inputs and Outputs
• Full console metering of every channel and mix bus
• Total recall of every console parameter
What you need to use it
• Computer:
• a Power-PC based Macintosh with a FireWire Port and OS 9.1 or newer
(B&W G3, G4, Powerbook G3 or G4 recommended). Mac OS 9.2.2 rec-
ommended.
• 128MB of RAM
• a monitor that supports 1024x768 resolution or better
• Peripheral FireWire Adaptor:
• OHCI compliant PC-Card or
• OHCI compliant PCI card
• Software:
• an ASIO 2 compatible host (such as Cubase, Nuendo, Logic Audio, Digital
Performer, Deck or Peak)
• for ASIO direct monitoring-based foldback and overdubbing, an applica-
tion that supports ASIO direct monitoring