Measurement Computing WavePort 312P rev.1.0 - Manual (Page 3)

PowerVista/312 User’s Manual i
Warranty
PowerVista/312’s warranty is as stated on the enclosed warranty card. No other warranty is expressed or
implied. The warranty is void if the product is operated in excess of specified limits for electrical and
environmental conditions or if handled carelessly or in disregard of standard Electro-Static Discharge
precautions. We do not guarantee product suitability for all applications.
Limitation of Liability
IOtech, Inc. cannot be held liable for any damages resulting from the use or misuse of this product.
Copyright, Trademark, and Licensing Notice
All IOtech documentation, software, and hardware are copyright with all rights reserved. No part of this product
may be copied, reproduced or transmitted by any mechanical, photographic, electronic, or other method without
IOtech’s prior written consent. IOtech product names are trademarked; other product names, as applicable, are
trademarks of their respective holders. All supplied IOtech software (including miscellaneous support files,
drivers, and sample programs) may only be used on one installation. You may make archival backup copies.
FCC Statement
IOtech devices emit radio frequency energy in levels compliant with Federal Communications Commission
rules (Part 15) for Class A devices. If necessary, refer to the FCC booklet How To Identify and Resolve
Radio-TV Interference Problems (stock # 004-000-00345-4) which is available from the U.S. Government
Printing Office, Washington, D.C. 20402.
CE Notice
Many IOtech products carry the CE marker indicating they comply with the safety and emissions standards of
the European Community. As applicable, we ship these products with a Declaration of Conformity stating
which specifications and operating conditions apply.
Warnings and Cautions
Refer all service to qualified personnel. This caution symbol warns of possible personal injury or equipment
damage under noted conditions. Follow all safety standards of professional practice and the recommendations
in this manual. Using this equipment in ways other than described in this manual can present serious safety
hazards or cause equipment damage.
This warning symbol is used in this manual or on the equipment to warn of possible injury or death from
electrical shock under noted conditions.
This ESD caution symbol urges proper handling of equipment or components sensitive to damage from
electrostatic discharge. Proper handling guidelines include the use of grounded anti-static mats and wrist
straps, ESD-protective bags and cartons, and related procedures.
Specifications and Calibration
Specifications are subject to change without notice. Significant changes will be addressed in an addendum or
revision to the manual. As applicable, IOtech calibrates its hardware to published specifications. Periodic
hardware calibration is not covered under the warranty and must be performed by qualified personnel as
specified in this manual. Improper calibration procedures may void the warranty.
Quality Notice
IOtech has maintained ISO 9001 certification since 1996. Prior to shipment, we thoroughly test our products
and review our documentation to assure the highest quality in all aspects. In a spirit of continuous
improvement, IOtech welcomes your suggestions.