JLCooper FaderMaster Pro - Manual (Page 9)

MIN
In Program mode, hold MIN while moving a fader to select the
minimum value that a control will send.
MAX
In Program mode, hold MAX while moving a fader to select the
maximum value that a control will send.
SPEED/BM
For Faders or Foot Pedal,
In Program mode, hold SPEED/BM while moving a fader to
select the speed of the MIDI data sent out. Select 1 through 4.
(4 is the fastest.)
For Buttons or Foot Switch,
In Program mode, hold SPEED/BM while moving a fader to
select the Button Mode, either Momentary, Latched, or Fader.
Momentary: Button sends a MIDI command when
pressed, using MAX as its value. Sends another MIDI
command when released, using MIN as its value.
The LED above button is momentary, that is, it is only on as
long as the button is held down.
Latched: Button sends a MIDI command when pressed,
using MIN as its value, and another message when pressed
again, using MAX as its value.
The LED above button is latched, that is, it turns on with the
first press and off with the second press.
Fader Value: Button sends a MIDI command when
pressed. When released, it sends the same command using
the fader position as its value.
The LED above button is latched, that is, it turns on with the
first press and off with the second press.
9