JLCooper FaderMaster Pro User Manual

Page 68

S-1000
When using the FaderMaster Pro as a volume controller for the
S-1000, be aware that a volume value equal to 0 results in the
voices shutting off. Set your Minimum Value equal to 1 to
avoid this situation.

Korg M-3R
This one bank controls 30 different parameters.
The parameters depend on whether the M-3R is set to
Edit Combi, Program, Effect, or Drums.

This chart will help you determine which parameter is being
sent:

1. VDF Cutoff
2. VDA Attack Time
3. VDA Attack Level
4. VDA Decay Time
5. Break Point
6. Slope Time
7. Sustain Level

Edit Combi

Edit Prog

Edit Effect

Edit Drums

Type Sel

Level

Trans

Detune

---

Upper

Level

KW Top

Bottom

Osc Type Poly HLD Drum Kit

Osc Oct

Osc

Delay

Pitch MG

Wave

Key Sync

Effect

Type

Time

Dly

E/R

H. Dmp

Dly

L EQ

Drum
Type

Key

Tune

Decay

Pan

----

Frq

H EQ

Assign

Fader 1

Fader 2

Fader 3

Fader 4

Fader 5

Fader 6

Fader 7

Fader 8

Additional Notes
Note that the Yamaha DX-7 banks will work with the DX-7II
and TX-802. The Kawai K-1 bank should work with the K-III.
The Emu Proteus banks are compatible with the Proteus II.

Refer to the Preset Card that came with the FaderMaster
Pro,(and printed on Page 63 for your conveniece) to see
which parameters are controlled by each fader.