JLCooper FaderMaster Pro - Manual (Page 38)

This Touch feature allows any MIDI sequencer to behave like a
six-figure automated mixer with touch-sensitive faders. There
is no guessing, and no button that needs to be pressed at an
exact moment. You have the feel of an automated mixer, that
lets you grab any fader at any time and begin editing a track of
controller commands.
Really Important
At this point, you may be tempted to select an Automation
Bank and move a fader to see what happens. No problem,
except that when you move a fader you may notice right away
that no MIDI data comes out of FaderMaster Pro!
In the Automation Bank, the faders do not send MIDI data until
you “Write Enable” them, by pressing the button above the
fader.
To make automation really usable and editable, you need the
power of being able to turn faders on and off, and this is done
with the buttons above the faders.
And, yes, the buttons above the faders are also used for
muting. This is all explained in detail in this chapter, so please
be patient.
Once you get going, you will find it very natural to work with,
but at the outset it could be confusing, so we recommend that
you read this chapter carefully before trying to complete a
project while under time pressure.
38