JLCooper FaderMaster Pro - Manual (Page 20)

Programming Faders (In General)
➤ First select a Programmable User Bank number,
P1 through P20.
Use the UP or DOWN buttons to step to the desired program
number, or, hold UP or DOWN while moving any fader and
stop moving the fader when the desired number is reached.
➤ Enter Fader Program mode.
Press the PROG button once so that the FADER LED is lit.
➤ Press and hold a button corresponding to the desired
parameters or attributes while moving a fader.
➤ Exit Fader Program mode.
Press the PROG until both FADER and BUTTON LEDs are off.
Simple Example
To make fader 1 send MIDI Controller data on MIDI channel 4
when moved,
❏ Enter Fader Program mode. (Press PROG once.)
❏ Move fader 1 while holding the PARM button
until Co is displayed.
❏ Move fader 1 while holding the CHAN button
until 4 is displayed.
❏ Exit Fader Program mode.
More programming details are provided in the following pages.
20