JLCooper FaderMaster Pro - Manual (Page 10)

TOUCH (that is, SHIFT and SPEED/BM)
In the Automation Banks, turns on FaderMaster Pro’s unique
Touch-Sensitive Automatic Punch In.
Press SHIFT TOUCH to toggle between Touch On ( t[K) and
Touch Off ( 0FF).
TOUCH is used to effect seamless edits to sequencer tracks
consisting of controller commands.
When a fader is moved, the fader will not send any MIDI
Controller commands until the fader level exactly matches the
level of previously recorded Controller commands.
GROUP
In the P Banks, in Program Mode, hold GROUP while moving a
fader to select a group master for a given fader.
Faders may be grouping in one of three different group modes.
Exit Program Mode, then hold SHIFT and GROUP while
moving a fader to select the group mode.
Absolute Grouping: Fader values match the master.
Relatively Scaled Grouping: Fader values are scaled
based on how much the master has moved with respect
to the fader throw. That is to say, when you fade the
master, all the values reach their minimum value at the
same time.
Offset Grouping: Fader values are offset by the value of
the master, as referenced to the center of the master's
throw. That is to say, the value of the master is added to
or taken away from the faders that are part of the group.
PROTECT (that is, SHIFT and PARM#)
Hold SHIFT and PROTECT and move any fader to turn Protect
on and off. When display indicates
PRO, FaderMaster Pro may
not be reprogrammed.
10