JLCooper FaderMaster Pro - Manual (Page 56)

Snapshot Example
Say that you have programmed the first fader in the
Automation Bank to MIDI Controller number 0 on MIDI
Channel 1.
In Bank A 1 you move all the faders up, the values are all 127.
Then say you change to Bank A 2 and move all the faders
down. The MIDI values are all 0.
Pressing SNAP would result in this MIDI data being sent out:
MIDI Controller 0, Channel 1, value 127
MIDI Controller 1, Channel 1, value 127
MIDI Controller 2, Channel 1, value 127
MIDI Controller 3, Channel 1, value 127
MIDI Controller 4, Channel 1, value 127
MIDI Controller 5, Channel 1, value 127
MIDI Controller 6, Channel 1, value 127
MIDI Controller 7, Channel 1, value 127
MIDI Controller 8, Channel 1, value 0
MIDI Controller 9, Channel 1, value 0
MIDI Controller 10, Channel 1, value 0
MIDI Controller 11, Channel 1, value 0
MIDI Controller 12, Channel 1, value 0
MIDI Controller 13, Channel 1, value 0
MIDI Controller 14, Channel 1, value 0
MIDI Controller 15, Channel 1, value 0
56