JLCooper FaderMaster Pro - Manual (Page 24)

➤ To Assign Groups
Enter Fader Program Mode by pressing PROG until the FADER
LED is lit.
Hold the GROUP button while moving a fader to select the
master for that fader.
For the example just given, hold GROUP and
move fader 1 until a "4" is displayed,
move fader 2 until a "4" is displayed,
move fader 3 until a "4" is displayed,
move fader 5 until a "8" is displayed,
move fader 6 until a "8" is displayed,
move fader 7 until a "8" is displayed,
Exit Fader Program mode.
Group Modes
FaderMaster Pro operates in one of three Group modes:
➤ Absolute
➤ Relatively Scaled
➤ Offset
Choose one of the three Group Modes by pressing SHIFT
GROUP and move any fader, the display indicates:
0 f f 0 f f 0 f f 0 f f 0 f f
r e 1 r e 1 r e 1 r e 1 r e 1
a b s a b s a b s a b s a b s
Group Modes may be selected "on the fly", while you are
actually operating FaderMaster Pro. You do not need to enter
Fader Program mode.
24