JLCooper FaderMaster Pro - Manual (Page 43)

How the Automation Bank is
Programmed
The Automation Bank is designed to be very simple to
program.
In the Automation Bank, FaderMaster Pro sends MIDI
Controllers only.
You need only program a single fader, the rest of the faders
and mutes are programmed automatically.
You choose a MIDI channel, and the first controller number.
Each higher fader is automatically assigned the next higher
controller number.
SPEED, GROUP, MIN, MAX and MERGE are not changeable.
Before Programming the Automation
Bank
First, before programming FaderMaster Pro,
Make sure that the PROTECT feature is OFF.
(The PROTECT feature works like the safety tab on a cassette
or diskette, to prevent you from accidentally changing the
memory of FaderMaster Pro.)
Hold SHIFT and PROTECT observe the Protect status.
Move any fader to turn Protect on and off.
When Protect is off, the display indicates
0FF.
When Protect is on, the display indicates Pro.
43