JLCooper FaderMaster Pro - Manual (Page 12)

UNIT# (SHIFT and PARM)
Sets System Exclusive Unit ID Number. This is only used in
conjunction with the optional FaderMaster Pro Remote
Software. Allows software to independently communicate with
more than one FaderMaster Pro.
Hold SHIFT UNIT# while moving any fader to select a number
from 0 to 15.
This allows the FaderMaster Pro Remote software to program
and back up as many as 16 FaderMaster Pros.
CHAN (SHIFT and CHAN)
Sets MIDI Channel of FaderMaster Pro so FaderMaster Pro can
respond to MIDI Program Change commands.
Hold SHIFT and CHAN while moving any fader to select a
MIDI channel from 1 to 16.
Dashes in the display indicate that the reception of program
changes has been disabled.
12