JLCooper FaderMaster Pro - Manual (Page 16)

Bank Selection
FaderMaster Pro’s memory is organized into three sets or
“Banks” of programs.
(In developing FaderMaster Pro, we decided to organize the
memory into “Banks” as opposed to “Savings and Loans”.
Otherwise you might come back the next day and find them
missing or renamed.)
P 1 through P 20 User Programmable Banks
A 1 through A 8 Automation Banks
F 1 through F 50 Factory Banks
Step up through the banks one at a time by pressing UP.
For example, if the display says
P 1,
Press UP, display then says P 2.
Step down through the banks one at a time by pressing DOWN.
For example, if the display says
P 2,
Press DOWN, display then says P 1.
Rapidly scroll through all the banks by holding either
UP or DOWN while moving any fader.
Stop moving the fader at the desired bank.
As you step through banks P 1 through P 20, FaderMaster Pro
sends out a short system exclusive MIDI command for each
bank change, informing other FaderMaster units to also change
banks.
Selecting a new bank means that you are selecting entirely
different MIDI assignments for the faders and buttons.
This means that you can use FaderMaster Pro for multiple
applications at the same time, simply by changing banks.
16