JLCooper FaderMaster Pro - Manual (Page 57)

Big Example
Here is an overview of a typical Automated Mixing Session.
All of the FaderMaster Pro’s Automation Bank features will be
used here, so you can get an idea of the flow of automated
mixing from start to finish.
First Set Up FaderMaster Pro
Select the first Automation Bank, A 1, by using UP or DOWN.
Hold UP or DOWN while moving a fader until display says A 1.
Set Bank Limit
Determine the number of channels that you want to automate.
Usually that is the number of audio channels of a MIDI
controlled mixer.
Set a Bank Limit on FaderMaster Pro so you can quickly step
through only the banks you need.
Press UP and DOWN to lock in a Bank Limit.
When UP and DOWN are released, the Bank Limit is locked in,
as indicated by a decimal point in the display.
For example, for a 24 channel system,
For example, to set the Bank Limit to A 3,
❏ Select A 1
Display says A 1
❏ Press UP Display says A 2
❏ Press UP again and do not release it
Display says A 3
❏ Press DOWN.
❏ Release both buttons. Display says A 3.
Now, pressing UP results in the following sequence,
A 1, A 2, A 3, A 1, A 2, A 3, etc.
57