JLCooper FaderMaster Pro - Manual (Page 75)

Registered Controller Numbers
The following list shows the standard Continuous Controller
Functions, as defined in the MIDI 1.0 Detailed Specification.
You can use FaderMaster Pro to send any of these MIDI
commands.
The fader would first be set using PARM to send Continuous
Controller commands by selecting Co.
The PARM# (Parameter number) is given in the table below.
0 Undefined
1 Modulation wheel or lever
2 Breath Controller
3 Undefined
4 Foot Controller
5 Portamento Time
6 Data entry, Most Significant Byte
7 Main Volume
8 Balance
9 Undefined
10 Pan
11 Expression Controller
12-15 Undefined
16-19 General Purpose Controllers
20-31 Undefined
32-63 Least Significant Byte for 0-31
64
Damper Pedal (Sustain)
65 Portamento
66 Sostenuto
67 Soft pedal
68 Undefined
69 Hold 2
70-79 Undefined
80-83 General Purpose Controllers
84-91 Undefined
92
Tremolo Depth
93 Chorus Depth
94 Celeste (Detune) Depth
95 Phaser Depth
96 Data increment
97 Data decrement
98 Non-Registered Parameter LSB
99 Non-Registered Parameter MSB
100 Registered Parameter LSB
101 Registered Parameter MSB
102-120 Undefined
121-127 Channel Mode Messages
75