JLCooper FaderMaster Pro - Manual (Page 17)

For Example
Say that P 1 has been programmed to send MIDI controllers to
alter the parameters on a signal processor, such as the Alesis
QuadraVerb 2.
Say that P 2 has been programmed to send MIDI controllers
(on a different MIDI channel) to a adjust a MIDI Graphic
Equalizer, such as the DOD MEQ28.
First Select P 1. Then, move the faders to change the sound
characteristics on the QuadraVerb 2.
Press UP to select P 2. Then, move the faders to change the
EQ curve on the MEQ unit.
Press DOWN again to select P 2 to adjust the QuadraVerb, etc.
This allows you to have immediate live control of multiple
signal processors. (Without, obviously, walking over to the
rack and fiddling with parameters one at a time with an LCD
menu.)
In addition, the MIDI output of FaderMaster Pro may be
recorded onto a sequencer, so that the signal processor
changes may be automated and occur simultaneously.
17