JLCooper FaderMaster Pro - Manual (Page 60)

Turn TOUCH On
Press SHIFT TOUCH to toggle touch on and off.
Again, make sure that you have a MIDI cable from the out of
the sequencer to the in of FaderMaster Pro. TOUCH relies on
finding a NULL point, and a NULL point can only be
determined when there is MIDI data coming into FaderMaster
Pro, so it can be compared with the position of the fader that
you are moving.
Play back the previously recorded controller tracks while re-
recording the MIDI data that comes out of FaderMaster Pro.
When you are satisfied with the mix, used the most current
version of the track of controller data.
Or keep several tracks of controller data to represent different
mixes of the same material.
Simply play-enable the tracks from your sequencer that
represent the desired mix.
60