JLCooper FaderMaster Pro - Manual (Page 23)

➤ Grouping
In the P Banks, faders may be grouped.
To group a fader means that you assign some number of faders
to be controlled by another fader called a "group master fader".
When you move a group master fader, FaderMaster Pro sends
out MIDI commands just as if you simultaneously moved all of
the faders assigned to the group master fader.
In other words, moving one fader sends out multiple MIDI
commands as if several faders were being moved.
An Application Example
Say that the eight faders have been programmed to send
MIDI Volume (MIDI Controller #7) on channels 1 through 8.
You could make fader 4 a “group master fader” by assigning
faders 1 through 3 to group master 4.
You could make fader 8 a “group master fader ” by assigning
faders 5 through 7 to group master 8.
The result would be that if you
Move this Fader:
FaderMaster Pro Sends:
1 MIDI Volume on Channel 1
2 MIDI Volume on Channel 2.
3 MIDI Volume on Channel 3.
4 MIDI Volume on Channels 1 through 4.
5 MIDI Volume on Channel 5.
6 MIDI Volume on Channel 6.
7 MIDI Volume on Channel 7.
8 MIDI Volume on Channels 5 through 8.
Moving a master results in data being sent for the master and
all the faders assigned to the master.
23