JLCooper FaderMaster Pro - Manual (Page 39)

Bank Limit
Suppose you are using FaderMaster Pro to control 24 channels
of automation, such as 24 channels of MIDI controlled VCAs,
or 24 on-screen faders on a sequencer or HD recorder.
That means that most of the time you will be only using
FaderMaster Pro’s Automation Banks A 1, A 2 and A 3.
Ideally, you should be able to instantly switch between
Automation Banks A1, A 2 and A 3, with a single button push,
without having to worry about accidentally selecting some
irrelevant bank.
A method has been provided to quickly switch between your
Automation Banks, its called “Bank Limit”.
Setting a Bank Limit means that, as long as you are using the
Automation Banks, pressing UP or DOWN will simply cycle
through the valid Automation Banks, skipping the banks
outside of the limit.
For example, setting the Bank Limit to A 3 means that
Pressing UP will result in FaderMaster Pro cyclically recalling
A 1, A 2, A 3,
A 1, A 2, A 3, etc.
Pressing DOWN will result in FaderMaster Pro cyclically
recalling
A 3, A 2, A 1,
A 3, A 2, A 1, etc.
39