Gasboy FiPay Payment Network - Manual (Page 9)

MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012 Page 9
Islander Plus/CFN Plus Setup
5 Click the Setup button in the Payment Terminal section to open the Setup PAIS screen
(see Figure 3 ).
Figure 3: Setup PAIS Screen
Credit Processor Drop
Down List
Device IP Address Device Port
6 Select NBS from the Credit processor drop down list.
7 In the Specific section of the page, set the Device IP to the IP address of the computer that has
FiPay installed. This is usually a standalone PC. However, it can be the same PC that Fleet
Head Office (FHO) is installed on.
8 In the Specific section of the page, set the Device Port to the Transmission Control
Protocol/Internet Protocol (TCP/IP) Port of the computer that has FiPay installed. The
standard port used for FiPay is 24900. Ensure that any Firewalls are set to allow activity on
this port.
Note: Details can be found in
“Configuring Windows Firewall” on page 29 .