Gasboy FiPay Payment Network - Manual (Page 10)

Islander Plus/CFN Plus Setup
Page 10 MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
9 In the Specific section of the page, click the Product Map button. When you select
ProductMap on the Payment Setup page, a window appears where you can map the local
product codes that you have loaded into the site to those which are predetermined by the
Network Processor.
Figure 4: Translate Product Codes Screen
Translation Drop Down
List
External Code sent to
Host. Refer to
“Appendix
A: NACS/PCAT Product
Reference Tab”
on
page 47 .
Local Product Codes
Set in the SiteOmat
10 Select NBS from the Translation group drop down list.
11 Select the local product loaded in the Islander PLUS system from the Product name - code
drop down list that you want to cross refer.
12 Set the External code with the corresponding network code for the Local Product set in the
Product name-code box (see
Figure 4 ). For network codes, refer to the NBS Product Table in
“Appendix A: NACS/PCAT Product Reference Tab” on page 47 .
Note: This is the product code sent to the Host network for Credit transactions and it provides
proper authorization along with the billing information.
13 Repeat steps 9 and 10 for all local product codes.
14 Click OK to save your data when you have finished your entries or click Cancel to exit the
screen without saving.