Gasboy FiPay Payment Network - Manual (Page 5)

MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012 Page 5
Preparing for Configuration
Preparing for Configuration
Before you configure, obtain the following information from your NBS representative:
• Your Merchant ID#. Cenex ® customers obtain Merchant ID from CHS.
• Phone numbers (primary and secondary) for the modem used for NBS authorization, if
using dialup connectivity to NBS, or Abierto box with dialup backup.
• An open serial port on the desktop computer hosting the FiPay application. A USB to
serial adaptor can be used, if required.
• An available USB port for the software Hardware Against Software Piracy (HASP) key.
Note: It is important to have a dialup modem or Abierto router box for connection to the NBS
network.
Determine the desktop computer’s serial communications port to be assigned to the FiPay
application for connection to the NBS host through the modem or Abierto router.
You may also want to determine which of the accepted card types you will use and ensure that
all product information is loaded in the Islander Plus system. For more information, refer to
MDE-4817 SiteOmat In-House Station Controller Setup and Maintenance Manual.
Before loading new versions of software and/or initializing NBS, ensure that all previous
transactions are settled and accounted for. Failure to do so can cause a loss of transaction
data or create a problem for the next settlement.
CAUTION
System Requirements
Following is a list of FiPay requirements for a system. If the system on which FiPay is
installed includes other services, then you must scale the system for those services/products, as
required.
Minimum Hardware Requirements
• 1 GB of RAM
• 2 GHz of CPU Speed
• 40 GB of Disk Space
Minimum Software Requirements
• .NET 2.0 or higher
• Windows
® XP PROFESSIONAL or Windows 7 Professional Minimum (Windows 2003
Server preferred)
CFN+ or Islander PLUS Minimum Software Requirements
• Operating System - v.BSP 1.08 (SP8) or higher
• SiteOmat - v.SO 6.3.3.088 or higher
Fleet Head Office - v.FHO 6.3.3.035 – DB:342 or higher