Gasboy FiPay Payment Network - Manual (Page 25)

MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012 Page 25
Installing FiPay (NBS)
Multiple
Call Gasboy Technical Assistance Center (TAC) 1-800-444-5529 when using
this option.
1 Enter M for the Multi Gasboy option. Following screen will display after the installation files
uncompress.
Figure 27: Multi Gasboy Installation
2 Press any key to continue with the installation.
3 The HASP key driver installation will begin. Press any key to continue the installation
process.
4 The script will then copy the driver files for the HASP to your computer and make the required
configuration changes to your computer for it to operate. At this point, you will see the
following two messages (see
Figure 28 ). The first message indicates that the driver is being
loaded and second message indicates that the operation has been successfully completed.
Figure 28: Operation Successful Message
(i)
(ii)
The HASP key does not have to be inserted for the drivers to be successfully installed.
However, it must be inserted before FiPay service will start and function.
IMPORTANT INFORMATION
5 Press any key to complete the software installation.
6 Call Gasboy TAC 1-800-444-5529 when using this option.