Gasboy FiPay Payment Network User Manual
Gasboy Hardware
MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
Page 1
Introduction
Purpose
This manual provides instructions for setting up a CFN
®
+ or ISL+ system that connects to
National Bankcard Services (NBS) for card verification using the FiPay
™
application.
Table of Contents
Topic
Page
Disabling Bank Cards at the Island During the Evening
Appendix A: NACS/PCAT Product Reference Tab
Appendix B: Running EPS Consolex GUI Utility
Appendix C: HASP Key Information
Appendix D: Modem Initialization String Info
Cards Accepted
NBS (FiPay) can accept the following cards. To know which cards will be active at your
location, contact your NBS representative.
Bank Cards
American Express
®
Discover
®
MasterCard
®
VISA
®
Fleet Cards
MasterCard Fleet
PHH (except Donlen)
VISA Fleet
Voyager
WEX
SM
MDE-4999A
FiPay
™
Payment Network Installation and Setup Instructions
October 2012
Document Outline
- FiPay™ Payment Network Installation and Setup Instructions
- Introduction
- Important Safety Information
- Preparing for Configuration
- Islander Plus/CFN Plus Setup
- Installing FiPay (NBS)
- Disabling Bank Cards at the Island During the Evening
- Settlement for NBS
- FHO Reporting
- Error Message Info
- Debug Info
- Appendix A: NACS/PCAT Product Reference Tab
- Appendix B: Running EPS Consolex GUI Utility
- Appendix C: HASP Key Information
- Appendix D: Modem Initialization String Info