Gasboy FiPay Payment Network - Manual (Page 16)

Installing FiPay (NBS)
Page 16 MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
16 After the configuration has been saved, the HASP key driver installation will begin. Press any
key to continue the installation process.
17 The script will then copy the driver files for the HASP to your computer and make the required
configuration changes to your computer for it to operate. At this point, you will see the
following two messages (see
Figure 13 ). The first message indicates that the driver is being
loaded and second message indicates that the operation has been successfully completed.
Figure 13: Operation Successful Message
(i)
(ii)
The HASP key does not have to be inserted for the drivers to be successfully installed.
However, it must be inserted before FiPay service will start and function.
IMPORTANT INFORMATION
18 Press any key to complete the software installation.
19 To complete the installation and start the FiPay service, refer to “Service Install Verification
and Start-up” on page 26 .
Option 2: Dialup Modem (See Figure 14 and Figure 15 on page 17 )
20 Enter the Terminal ID. This is the terminal ID for this location. Contact NBS for this number.
Cenex customers obtain Terminal ID from CHS.
21 Enter the COM Port for Dialup Modem. This is the COM port of the computer connected to
the modem.
22 Enter the NBS Phone Number. This is the number used by FiPay to Dial Out for
authorization.
23 Enter the Modem Init String. This allows you to edit the Init string for the Dial Out modem
used for authorization.
Note: You MUST include amp; after each ampersand symbol used in the init string. For more
details, refer to “Appendix B: Running EPS Consolex GUI Utility” on page 55 .
24 Enter the NBS Backup Phone Number. This is the number used by FiPay to Dial Out for
authorization.
25 Enter the Min Dial Attempts. This is the number of redial attempts.
26 Enter the FiPay Timeout. This is the number of seconds before FiPay will timeout and abort
the authorization attempt. This number must always be less than the Islander PLUS system.
27 Enter the Auto Key Renewal. This is the number of days left for the security keys to renew
automatically.