Figure 18, Important information – Gasboy FiPay Payment Network User Manual
Page 20
Installing FiPay (NBS)
Page 20
MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
Figure 18: Successful Configuration of Abierto Router with Dialup Modem
45
After the configuration has been saved, the HASP key driver installation will begin. Press any
key to continue the installation process.
46
The script will then copy the driver files for the HASP to your computer and make the required
configuration changes to your computer for it to operate. At this point, you will see the
following two messages (see
). The first message indicates that the driver is being
loaded and second message indicates that the operation has been successfully completed.
Figure 19: Operation Successful Message
(i)
(ii)
The HASP key does not have to be inserted for the drivers to be successfully installed.
However, it must be inserted before FiPay service will start and function.
IMPORTANT INFORMATION
47
Press any key to complete the software installation.
48
To complete the installation and start the FiPay service, refer to
on