Gasboy FiPay Payment Network - Manual (Page 12)

Installing FiPay (NBS)
Page 12 MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
Installing FiPay (NBS)
To install FiPay (NBS), proceed as follows:
1
Before you start, ensure that you have your FiPay HASP key available. While it is not
required to be inserted for FiPay to install, you must insert this key for FiPay to operate
properly.
IMPORTANT INFORMATION
Place the FiPay (NBS) executable file that is provided to you or downloaded from the File
Transfer Protocol (FTP) site on the C: drive of the system you wish to install it on.
2 Double-click the build executable file and follow the prompts to install or upgrade the
software. This file can be installed from any location on the hard drive or removable drive.
Note: If you already have a version of FiPay installed on this machine, you will be prompted
to preserve this directory for backup purposes later in the process.
Figure 6: FiPay Executable File
3 After clicking the executable file, a MS-DOS ® window appears followed by a number of file
names that scroll across the screen (see Figure 7 ) as they are unzipped for the installation.
Figure 7: MS-DOS Window