Islander plus/cfn plus setup, Warning, Before you begin – Gasboy FiPay Payment Network User Manual
Page 6

Windows version listed as Home, Starter, and so on are NOT
SUPPORTED.
All Windows Operating Systems must be listed as PROFESSIONAL or
higher to meet the minimum requirements.
Windows Vista
™
is NOT SUPPORTED.
WARNING
FiPay Payment Network software is intended to run on a standalone PC
or Server.
Before attempting to install FiPay Payment Network software on the same
PC/Server as the Fleet Head Office software, refer to
“Appendix C: HASP Key Information”
on
BEFORE YOU BEGIN
Before you Begin
Islander Plus/CFN Plus Setup
Page 6
MDE-4999A FiPay™ Payment Network Installation and Setup Instructions · October 2012
Islander Plus/CFN Plus Setup
To accept Credit Card sales using the Islander PLUS system, a Secure Socket Layer (SSL)
connection to the computer running the FiPay application must be established. The Islander
PLUS makes this connection automatically and then the connection is set up using the
following SiteOmat menus:
1
To navigate to the Station Parameters menu, login to the Islander PLUS.
a
Navigate to the SETUP page.
b
Click the ADVANCED button.
c
Click or select the GLOBAL tab at the TOP of the page.
2
On the Global page, make the following changes:
a
Change the User Activity Timeout to 120.
b
Change the Authorization Timeout to 120.
c
Click the Save button to save the changes.