Gasboy CFN Series NBS - Manual (Page 41)

MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008 Page 37
Required Cron(s) Using NBS
The Settlement Report
The report for settlement which is printed on the log and stored on disk looks like the
following:
Settlement BALANCED: 5 trans for 8.41 Fri 2/25/05 10:48 AM
-----------Printing: P:/nbs.tmp --------------- Fri 2/25/05 10:48 AM
Unit # GB1234567890123
Totals for batch #0161 2/25/05 10:48
Site Host
# Total # Total
Proprietary 1 2.00 1 2.00
Visa 2 3.00 2 3.00
Master Card 1 2.00 1 2.00
Other 1 1.41 1 1.41
== ==== == =====
All Credit 5 8.41 5 8.41
Credit Void 0 0.00 0 0.00
Credit Return 0 0.00 0 0.00
Debit 5 58.79 5 58.79
Debit Void 1 4.32 1 4.32
Debit Return 1 5.00 1 5.00
Prepaid/Loyalty Card Transactions
Action count Total
Activate: 0 $0.00
Recharge: 0 $0.00
Balance Req: 0
Enrollment: 0
Note: In 2005, Master Card announced that Diner's Card account numbers starting with 36
will be processed as Master Cards, with Master Card IDs assigned to them and they
will be added to the Master Card portion of the settlement report.
Required Cron(s)
PURGE SITE
Use the PURGE SITE command to clear the transactions from the transaction file to prevent it
from filling up and shutting down the site (refer to MDE-4315 CFN III Manager’s Manual for
Windows NT for details). It can be run from a cron once a day after the settlement if the
transaction file is large enough to contain a full day of transactions (refer to
“Settlement for NBS” on page 36 ). Ensure that the settlement was successful before running
PURGE SITE. Busy locations may need to have the PURGE SITE run more often. Always run
a settlement before running the PURGE SITE.
Note: If the STOP command is to be used in a cron, do not use the STOP;A option. If a sales
transaction is being sent to the NBS host and the Site Controller when the STOP;A
command is issued, the Site Controller will reboot.