Gasboy CFN Series NBS User Manual
Page 22
Using NBS
NBS Command
Page 18 MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008
Local Authorized Fallback Processing
The maximum hours allowed in a fallback condition provides protection for a site from being
in a fallback condition for an excessive amount of time. This is especially useful at unattended
sites, where fallback processing may not be noticed for an extended period of time. The
default of zero (0) disables fallback from occurring. This field is represented in hours and the
maximum hours of contiguous fallback is 120 hours. This parameter must be set to a valid
fallback number along with the card parameters being enabled for fallback, refer to
on
, to allow fallback processing.
Note: The system must be rebooted whenever this parameter is changed.
Use Modem Pre-dial
This parameter, when enabled (default), starts the host modem dial process during the last
prompt message. For example, if a debit card or fleet card is used that only requires a PIN
entry, the dial process will take place when the prompt is displayed. If a fleet card is used
which requires several entries to multiple prompt displays, the dialing process will start when
the last prompt is displayed.
Note: Modem pre-dial will not work with VSAT or other WAN-based systems that expect
transaction data to be sent instantaneously with the pre-dial host connect. Contact the
WAN host administrator before using this option on non-modem systems.
UTC Time Zone Offset and Daylight Savings Indicator
Each system must be configured for the correct UTC time zone and daylight savings (if
applicable in that geographic location). It is possible for the host system to deny transactions
based on wrong date and time zones.
Suppress Veh # on Receipts
This parameter allows the option of not printing vehicle number on receipts due to local
customs or restrictions.
Attendant at Pumps and Signed Receipts
Some locations require an attendant to pump fuel for the customer. This parameter should be
enabled if the location requires an attendant to service customers for fuel purchases.
Accept Visa Fleet as Std Visa Card
If the merchant or host system does not accept Visa Fleet but processes standard Visa cards,
then this item should be enabled to allow a Visa Fleet card to be processed as a standard Visa
card.
Accept MasterCard Fleet as Std MasterCard
If the merchant or host system does not accept MasterCard Fleet but processes standard
MasterCard cards, then this item should be enabled to allow a MasterCard Fleet card to be
processed as a standard MasterCard card.
Max Authorized Card Amount
This parameter is used to specify the maximum amount allowed for a single card purchase on
this system. Island limits are set elsewhere. However, they cannot exceed this house limit.