Gasboy CFN Series NBS - Manual (Page 26)

Using NBS NBS Command
Page 22 MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008
Edit Modem Parameters (-M)
If the site is to be upgraded, the following program must be run.
1 Select option 4 from the Main Menu (NBS -M) or type MODEMS at the command line to set
up the modem. The Edit Modem Parameters screen appears.
Copyright (2000) Gasboy International
Network Setup for CFN/3
Modems (002) File (001)
EDIT MODEM PARAMETERS
1. Modem Name : Hayes Optima
2. Baud Rate : 1200
3. Port Number : 4
Enter Item Number, W-Walkthrough, ?-Help, S-Save, Q-Quit :
2 Select Item Number 1 - Modem Name. The Select Modem Name screen appears (screen may
have a different list than the one shown below).
Copyright (2000) Gasboy International
Network Setup for CFN/3
Modems (002) File (001)
SELECT MODEM NAME
1. Obsolete
2. Hayes 1200
3. Generic Hayes (Smartmodem/Accura)
4. Hayes Optima
5. Hayes Accura 14.4 (5611)
6. Hayes Accura 336. (5914)
7. BocaModem 2400
8. Boca Research 14400
9. SPS VSAT VISA 1
10. Cardinal 2400
11. Everex 2400
12. Practical Peripherals
Enter Item Number, RETURN-Next Page, ?-Help, Q-Quit :
3 Select the modem for the system; enter the correct baud rate and port. Change the baud setting
by entering the number next to the baud rate shown at the bottom of the screen. For example,
entering 2 will set the baud rate at 1200.
If VSAT is used, the baud rate must be set to 2400.
For port, enter the port number (4 - 6). For example, entering a 4 will set the port to 4.
4 Select SAVE after setting up the modem.
Note: If you select Quit, you are given a second chance to save any changes. At the prompt
“Quit without saving changes [y/n]”, select No > Save to save the changes.