beautypg.com

Local product cross reference (-x), Caution – Gasboy CFN Series NBS User Manual

Page 27

background image

MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008

Page 23

NBS Command

Using NBS

Local Product Cross Reference (-X)

The Product Cross Reference creates a correspondence between the products in the Gasboy
product table and the host system. The menu shows the local Gasboy product code as it was
entered in the product table, the name of the product and the cross-reference product
associated with it. The default cross-reference, after running NBS -I, is Miscellaneous.

NBS Product Cross Reference

Local NBS

1: Diesel #2 Miscellaneous

3: Premium Miscellaneous

4: Reg Nolead Miscellaneous

5: Plus Nolead Miscellaneous

Enter Local Product Code, RETURN-next page, Press q to quit :

Note: This screen is an example of what is displayed after running NBS -I and may have

different local codes and descriptions than the screen at the site.

To cross-reference or map a local code to an appropriate NBS code, enter the Local Product
Code at the prompt. A Gasboy reference number can be entered or enter a “?” to provide a list
of reference numbers and descriptions. A complete list of NBS cross-reference codes can be
found in

“Product Codes”

on

page 40

.

All product cross-references will be defined as Miscellaneous after running NBS -I.
The Miscellaneous cross-reference will work for most Gasboy code merchandise
types. However if fuel, coupons (negative flow), or cash back products are not
cross-referenced to their correct perspective codes, monetary losses, inaccurate
customer billing, and system out-of-balance conditions will occur.

CAUTION

If a new Gasboy code is entered into the system after running NBS -I, the new code will not
show up on the menu. However, the Gasboy code can still be cross referenced by entering the
code number and selecting the NBS product description that best matches the new product.
The new Gasboy product number will show up on the screen the next time the screen is
displayed. It is not necessary to run NBS -I again to cross-reference new Gasboy product
codes.

This manual is related to the following products: