beautypg.com

Pre-auth mode – Gasboy CFN Series NBS User Manual

Page 21

background image

MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008

Page 17

NBS Command

Using NBS

Pre-auth Mode

This parameter can be set to one of the following modes:

1 - Value Only
The value-based mode will set the pre-authorization limits to the amount listed in the Card
Parameter table for every card. Refer to

“Edit Card Parameters (-C)”

on

page 20

for more

information about setting card limits. In this mode of operation, PS2000 is still supported by
NBS for all applicable bank cards. Specialty club cards, such as the Quarles and Fuel24 cards
are restricted by their internal restriction limits and are not subject to the limits in the Card
Parameter Table.

2 - PS2000 Table
The PS2000 mode allows the Card Parameter Table to restrict non-standard bank cards. The
more standard bank cards will be limited only by the amount authorized by the host system,
not the setting in the Card Parameter Table. See the following table to identify the card limits
set by the Card Parameters Table, limits set by the host, or limits sent in specialty cards.

Table Limited Cards

Host Auth Limited Cards

Specialty Limited Cards

Debit card

American Express

Fuel24

Cenex Gift

Discover

Quarles

SVS Gift

Master Card

Cenex Regional

GROWMARK Gift

Visa

GOGAS Gift

Master Card Fleet

Kwik Trip Gift

Visa Fleet

Kwik Trip Fleet

WEX

Kwik Trip Credit

Voyager

Fleet One

Gascard Access

Fuelman Plus

3 - Host Based
Host Equity-Based Authorization (HEBA), the system default, allows the host to govern the
amount of authorization for each card. Depending on the rules of the card, one fleet card can
be authorized for $250 while another fleet card is set to a different amount. Using HEBA is a
flexible (and recommended) way of dealing with PS2000 requirements.

One of the greatest advantages of HEBA is its ability to provide an organization’s group with
equality. If any changes are needed for a card type, one change at the host will change the
behavior at all merchant locations within that group. This allows a cost-effective way of
controlling or modifying pre-authorizations at all merchant locations from one host change.
The Card Parameter Table is not utilized for setting limits in this mode for any cards except
debit and gift cards. Debit and gift cards must always have their limits regulated by the Card
Parameter Table. Review the debit and gift card sections for more information about using
these types of cards. Specialty cards, if set up to use the site limit table, will not honor the site
limit table in HEBA mode. Specialty cards, used in HEBA mode, will be limited by the host.

This manual is related to the following products: